For years, I've regarded 3D printers as more of a workshop tool than a home gadget. Like a drill press or table saw, they're more useful after months of trial and error with various attachments and discarded plastic scraps. That's no longer the case for me now that I have the Bambu P1S combo.
The Bambu P1S has significantly reduced my frustration when printing objects. In less than 20 minutes, it fired off a near-perfect Benchy – a common test model used to evaluate printers' performance. Within just a few days of setting up my machine online, I was confident in the quality of my prints and could start jobs from my computer without worrying about completion rates.
My only complaints about the P1S are minor, but they do require some tolerance if you already have experience with 3D printing. As long as you're willing to handle a little plastic waste, you can print many items with ease.
When it comes to speed and quality, the Bambu P1S smashes past 200mm per second without breaking a sweat. In fact, I had to reinforce my end table due to the printer's speed causing some stringing on sharp corners. However, this increased speed is offset by a simple yet effective ritual – the "poop chute" – that addresses common causes of print failure.
Before each print and whenever it changes filament, the nozzle moves to a trash chute at the back of the print area and discards any excess material. The waste is then cleaned from the nozzle, eliminating the need for manual maintenance.
The Bambu P1S combo includes a multi-filament handling AMS (Advanced System Manager) that makes switching between colors or materials mid-print a breeze. This component is well worth the extra cost, especially if you plan on printing complex multi-color parts in one shot.
With the AMS, I can load multiple colors onto the rollers and choose them in my slicer software without having to manually swap filaments. The system even has slots for desiccant to keep your filament dry and ready to use.
While using Bambu filament spools with the AMS does provide an added layer of convenience, it's not necessary. However, I did experience some minor issues when synchronizing the filament colors and types back to my slicer software, which required me to manually reset these settings each time.
Despite this, the P1S has revolutionized the way I approach 3D printing. Rather than wrestling with my machine or dealing with filament swaps, I can now focus on creating complex projects without worrying about perfectly optimized beds or keeping stacks of filaments sealed in plastic bags.
Overall, the Bambu P1S Combo is an excellent choice for anyone looking for a simple yet powerful 3D printer that offers ease of use and high-quality prints.
The Bambu P1S has significantly reduced my frustration when printing objects. In less than 20 minutes, it fired off a near-perfect Benchy – a common test model used to evaluate printers' performance. Within just a few days of setting up my machine online, I was confident in the quality of my prints and could start jobs from my computer without worrying about completion rates.
My only complaints about the P1S are minor, but they do require some tolerance if you already have experience with 3D printing. As long as you're willing to handle a little plastic waste, you can print many items with ease.
When it comes to speed and quality, the Bambu P1S smashes past 200mm per second without breaking a sweat. In fact, I had to reinforce my end table due to the printer's speed causing some stringing on sharp corners. However, this increased speed is offset by a simple yet effective ritual – the "poop chute" – that addresses common causes of print failure.
Before each print and whenever it changes filament, the nozzle moves to a trash chute at the back of the print area and discards any excess material. The waste is then cleaned from the nozzle, eliminating the need for manual maintenance.
The Bambu P1S combo includes a multi-filament handling AMS (Advanced System Manager) that makes switching between colors or materials mid-print a breeze. This component is well worth the extra cost, especially if you plan on printing complex multi-color parts in one shot.
With the AMS, I can load multiple colors onto the rollers and choose them in my slicer software without having to manually swap filaments. The system even has slots for desiccant to keep your filament dry and ready to use.
While using Bambu filament spools with the AMS does provide an added layer of convenience, it's not necessary. However, I did experience some minor issues when synchronizing the filament colors and types back to my slicer software, which required me to manually reset these settings each time.
Despite this, the P1S has revolutionized the way I approach 3D printing. Rather than wrestling with my machine or dealing with filament swaps, I can now focus on creating complex projects without worrying about perfectly optimized beds or keeping stacks of filaments sealed in plastic bags.
Overall, the Bambu P1S Combo is an excellent choice for anyone looking for a simple yet powerful 3D printer that offers ease of use and high-quality prints.
I gotta say, I'm loving this new 3D printing game everyone's been talking about! The Bambu P1S combo sounds like a total lifesaver - no more frustration with print failures or wasted filament 
. And the fact that it can do 200mm per second is mind-blowing! 
I'm also loving the "poop chute" feature - genius idea to reduce manual maintenance and prevent clogs 
.
️. It's amazing how something as simple as that can change the whole 3D printing experience.
. Has anyone else had a chance to try out the Bambu P1S combo yet?
I totally agree with this guy! Having a good 3D printer can change the game 
, especially when it's easy to use like the Bambu P1S combo 
. The "poop chute" feature is genius 
, no more wasted filament or annoying maintenance tasks! And multi-color printing is so much fun 
, I've been wanting to try that out for ages 
.
, it's like having your own personal assistant 
. The only thing that would make this printer even better is maybe some more advanced features or customization options 
, but overall I'm super stoked to have mine now 
.
. It's fascinating how something as mundane as a 3D printer can be transformed into a game-changer by an innovative design like the Bambu P1S combo 
. The concept of "ease of use" speaks to me on a philosophical level - it suggests that our relationship with technology should be one of harmony and symbiosis, rather than struggle and frustration 
. But in this case, it seems that the Bambu P1S combo has found a elegant solution to this problem with its "poop chute" feature 
.
. This, to me, represents a fundamental shift in our relationship with technology - one that prioritizes creativity, experimentation, and joy over tedious maintenance and optimization tasks 
I'm so stoked about the new Bambu P1S combo! It's literally changed the game for me when it comes to 3D printing 
I mean, who wants to spend hours fiddling with settings and swapping out filaments? Not me 
. This thing is a total beast 
, cranking out sick prints in like 20 minutes 
.
with the Bambu P1S combo - if you're in the market for a new 3D printer, STOP WHAT YOU'RE DOING AND GET THIS ONE ASAP 
. I mean, who needs that stress in their life? 
The print quality is insane too - it's like butter coming out of a gun 
. Only downside is that my poor end table isn't going to know what hit it when those 200mm+ prints start flying off the press 
Like, I was totally skeptical at first but now I'm hooked! The speed is insane 
️ 200mm per second is no joke lol. And the AMS system is a total game changer 
. The poop chute thingy might sound weird but trust me, it's genius 
. Has anyone else tried this thing? What do you think? Should I get the Bambu filament spools too?
. That "poop chute" feature is genius - I can already imagine how much hassle it must've saved this dude 
. It's crazy to think about how much of a difference tech like this can make in your creative workflow